|
AGITATOR
The function of
the Agitator is
to prevent the
slurry mixture
from setting
while in
storage. This is
achieved by a
rotating
mechanism -
consisted of an
electric motor
with reduction
gear rotating a
shaft fitted
with three
blades at the
base of the
Agitator tank.
The rotating
blades keep the
slurry
“agitated”.
In an automatic
cycle mode, the
level of slurry
in the Agitator
tank is
controlled by a
level sensor
installed near
to the top of
the tank. This
prevent
overflowing and
also keep
the tank full at
all time
throughout the
cycle.
PNEUMATIC
SYSTEM
This consists of
a air compressor
and an
electro-pneumatic
control system
that controls
and operates the
pneumatic valves
for the water,
cement feeding
and the mixing
process.
ELECTRICAL
POWER SUPPLY AND
CONTROL BOARD
The board
contains all the
electrical
equipment needed
to power the
various motors
as well as the
auxiliary
equipment,
including the
load cell
measurement box,
and the
programmable
controller that
handles
operation of the
automatic cycle. |
