| |
|
|
 |
 |
|
BSP CX, CG & SL
RANGE OF HYDRAULIC HAMMERS |
|
|
BSP hydraulic piling
hammers provide an economical solution
for the installation of all types of
steel or concrete piles in either land
or marine environments. Energy outputs
range from 20kNm to 300kNm and the
versatile design allows operation by
crane suspension, from piling rigs or
leaders. Alternatively, operation can be
via an existing power source, or by
separate power pack.
Suitable for driving:-
Steel tubular bearing piles
Steel H piles
Reinforced concrete RIC piles
Cast in situ CIS piles
|
|
|
|
CX and CG Range
of Hammers |
|
|
|
Model |
Ram Mass |
Max Impact Energy |
Blow Rate |
Basic Hammer Weight Less Helmet |
|
Typical Stand-off C/L Hammer to
Leader Face |
|
|
Basic Hammer |
Hydraulics requirements |
|
Length |
Width |
Depth |
Pressure |
Flow Rate |
| |
kg |
kNm |
bpm |
kg |
mm |
mm |
mm |
mm |
bar |
1/min |
|
CX 40 |
3,000 |
40 |
45/100 |
5,000 |
4,022 |
870 |
970 |
500 |
200 |
180 |
|
CX 50 |
4,000 |
51 |
45/100 |
6,100 |
4,022 |
870 |
970 |
500 |
225 |
180 |
|
CX 60 |
5,000 |
60 |
43/100 |
7,600 |
4,975 |
820 |
970 |
500 |
200 |
200 |
|
CX 75 |
6,000 |
71 |
40/100 |
8,700 |
4,975 |
820 |
970 |
500 |
220 |
200 |
|
CX 85 |
7,000 |
83 |
40/100 |
9,800 |
4,975 |
820 |
970 |
500 |
240 |
200 |
|
CX 110 |
9,000 |
106 |
36/100 |
12,050 |
5,475 |
820 |
970 |
500 |
250 |
215 |
|
CG 180 |
11,000 |
180 |
34/100 |
17,240 |
7,000 |
1,225 |
1,300 |
700 |
260 |
385 |
|
CG 210 |
14,000 |
210 |
32/100 |
20,430 |
7,450 |
1,225 |
1,300 |
700 |
260 |
375 |
|
CG 240 |
16,000 |
240 |
31/100 |
22,760 |
7,750 |
1,225 |
1,300 |
700 |
285 |
370 |
|
CG 270 |
18,000 |
270 |
31/100 |
25,110 |
8,050 |
1,225 |
1,300 |
700 |
270 |
425 |
|
CG 300 |
20,000 |
300 |
29/100 |
27,460 |
8,350 |
1,225 |
1,300 |
700 |
290 |
415 |
|
Choice of models
from 70kW to 250kW
Fitted with turbocharged diesel
engines and bent axis pumps
Strong welded construction with
lockable doors
Fully soundproofed conform to EC
noise and emission regulations
The BSP range of Hydropack power packs
has been developed with the benefit of
many years of experience in producing
hydraulic piling hammers. As a result,
this diesel-powered, open circuit
range has the capability to optimize the
performance of BSP piling hammers. |
|
|
|
Specification |
HYDROPACK 70 |
HYDROPACK 125 |
HYDROPACK 250 |
|
Engine |
Perkins 1004-40T |
Perkins 1106TC-E60TA |
CAT
C9 |
|
Power rpm |
71kW @ 1800 |
127kW @ 2100 |
250 kW @ 190 0/1800 |
| Max.
flow 1/min |
175 |
215 |
430 |
|
Fuel Capacity |
260 |
260 |
315 |
|
Hydraulic oil cap. 1 |
345 |
345 |
950 |
|
Filtration
΅ |
10 |
10 |
10 |
|
Length m |
2.5 |
2.5 |
3.6 |
|
Width m |
1.1 |
1.1 |
1.55 |
|
Height m |
2.15 |
2.15 |
2.2 |
|
Weight dry Kg |
1900 |
1900 |
4200 |
|
Weight full Kg |
2300 |
2300 |
5200 |
|
Hammer range |
SL20-CX40 |
CX40-CX110 |
CX110-CG300 |
|
|
|
Controls and
Monitoring
Complete
hammer operation can be
controlled from
remote panel
Hydropack control provides
complete engine management and
system fault diagnosis
Energy monitor gives direct
reading of energy delivered to the drive cap system
Stroke Watch displays energy
and stroke of any BSP piling hammer.
The BSP suite of hammer controls
and energy monitor provides
comprehensive control of the
piling process, together with
performance information that is
essential for contractors
following quality control
procedures. This can be
downloaded to a PC in order to
provide a full record of the
driven pile. |
|
|
|
|
The
SVC50 is an
excavator-mounted
vibrator piling hammer
designed to maximize the
piling capability of
20-30tonne excavators.
The side grip allows
handling and driving of
longer sheet piles and
H-Piles. Tubular piles
can be installed with
special tube inserts. |
| |
|
Specifications |
|
Eccentric Moment |
5 |
Kg/m |
| Max
centrifugal force |
500 |
KN |
|
Max operating frequency |
3000 |
rpm |
|
Amplitude |
7 |
mm |
|
Hydraulic power |
80 |
Kw |
|
Operating pressure |
290 |
bar |
|
Hydraulic oil flow |
165 |
L/min |
| Total
weight |
2600 |
Kg |
|
Vibrating weight |
1600 |
Kg |
| Side
clamp force |
38 |
T |
|
Lower clamp force |
60 |
T |
|
|
|
|
|
|
|
|
